Technical sprays

Anti-corrosion wax - 400 mlAnti-corrosion wax is used in various applications, including:Automotive industry: Protection of vehicle bodies and frames from rust and corrosion.Marine application: Preservation of ship hulls, boats and marine equipment to protect them from salt water and corrosion.Metalworking: Protection of metal parts, tools and machines against oxidation and rust.Electronics: Application of wax on printed circuit boards or electronic components to protect them from moisture and corrosion.General industry: Protection of machines, equipment and metal structures in various industrial sectors against environmental influences and corrosion.The application of anti-corrosion wax usually requires the following steps:Cleaning: Ensure that the surface is clean and free of dirt, rust or oil. If necessary, use cleaning agents to clean the surface.Preparation: Dry the surface thoroughly before applying the wax to ensure optimum adhesion.Application: Apply the wax evenly to the surface. This can be done by spraying, brushing or dipping, depending on which product you are using.Allow to cure: Allow the applied wax to cure according to the manufacturer's instructions. This may vary depending on the product and ambient temperature.Refinishing: Check the coating as required and apply additional wax if necessary to ensure complete coverage.

Polysion Anti-Seize HT1400 is a high-performance, temperature-resistant lubricant. As an assembly spray, it protects against contact corrosion in active metals. has a very good separating effect and is metal-free. Due to its mineral-based active ingredients, it is temperature-resistant up to 1400°C. It prevents seizing and cold welding caused by friction, wear and corrosion. Properties : High temperature resistanceEffective corrosion protection Excellent adhesion and lubrication propertiesPressure resistant Resistant to gases, acids, salts and alkalisPrevents electrochemical corrosion

Anti-Seize Copper Paste is an indispensable lubricant for applications exposed to high loads and extreme conditions. This high-quality copper paste offers excellent protection against corrosion, wear and seizure, making it ideal for use in industry, vehicle construction and maintenance.

Effective cleaner and degreaser for components, brakes, clutch parts and metallic surfaces. Removes oils, greases, brake fluid and abrasion. Repeat the process for stubborn dirt. Properties : Powerful spray jet Cleans and degreases Free from lead, cadmium, acetone, toxic and corrosive substances Purity 99.9%

Chain and rope spray is usually applied as follows :Cleaning : Clean the chain or rope thoroughly to remove dirt, dust and old lubricant residues. A suitable cleaning agent or cleaning spray can help with this.Drying : Allow the cleaned chain or rope to dry completely before applying the spray.Preparation : Shake the can of chain or rope spray well to mix the ingredients.Application: Spray the spray evenly onto the chain or rope. Maintain a reasonable distance to ensure an even coating. Turn the chain or move the rope to ensure that the spray reaches all areas.Leave to soak in : Leave the spray to soak in according to the manufacturer's instructions. It usually takes a few minutes to penetrate and lubricate. Remove excess : Wipe off any excess spray with a clean cloth to prevent excessive build-up.Follow-up : Check the chain or rope and apply additional spray if necessary, especially after prolonged use or if they have been subjected to heavy wear.Regular application of chain and rope spray helps to extend their service life and maintain their performance. Again, follow the specific instructions for the product for optimal results.Chain and rope sprays are used in various areas :Vehicles : For lubricating and maintaining motorcycle chains, bicycle chains and other drive mechanisms. Industry and mechanical engineering : For maintaining and lubricating industrial chains, conveyor belts, ropes and machine parts to reduce friction and minimise wear.Marine : For lubricating ship rigging, boat winches and other marine applications to prevent corrosion and wear caused by salt water. Agriculture : For the care and lubrication of agricultural machinery, such as tractor chains and other moving parts, to ensure smooth operation. Household and DIY projects : For the maintenance of garage doors, garden tools and other household appliances with moving parts. These sprays serve to reduce friction, extend the service life of the treated parts and prevent corrosion by forming a protective layer.

Polysion Citrus Cleaner degreases quickly and effectively. Dirt, oils, greases, resin, tar, abrasion and much more. Cleans various surfaces such as metals, plastics, painted or coated. Properties : Specially neutral combination of active ingredientsNon-corrosive Effortlessly removes adhesive residues and dirt

Polysion Citrus Cleaner degreases quickly and effectively. Dirt, oils, greases, resin, tar, abrasion and much more. Cleans various surfaces such as metals, plastics, painted or coated. Properties : Specially neutral combination of active ingredientsNon-corrosive Effortlessly removes adhesive residues and dirt

Polysion Citrus Cleaner degreases quickly and effectively. Dirt, oils, greases, resin, tar, abrasion and much more. Cleans various surfaces such as metals, plastics, painted or coated. Properties : Specially neutral combination of active ingredientsNon-corrosive Effortlessly removes adhesive residues and dirt

Our cold spray provides fast and effective cooling for numerous applications. In industry and trade, it is used for targeted cooling of materials, for fitting components or for troubleshooting electronic components. The special cooling mixture creates an intense cooling effect within seconds, which acts precisely on the desired surface. Cold spray is ideal for use on metals, plastics and electronic components without damaging them. It is an indispensable tool for technicians, electronics engineers and fitters. Whether for maintenance, repair or cooling – cold spray is versatile and provides reliable support for professional tasks.

Compressed air spray - 400 ml Compressed air is a special spray used in numerous industries to perform cleaning tasks efficiently and thoroughly. Compressed air sprays are ideal for removing dust, dirt and other contaminants from sensitive surfaces without leaving any residue.

Präzisionsreiniger für elektronische Bauteile. Entfernt Korrosion und Abbrandreste von Kontakten. Reinigt elektronische Bauteile, die nicht unter Spannung stehen dürfen. Entfernt Staubablagerungen und reduziert Spannungsabfall. Erhöht die elektrische Leitfähigkeit. Durch die milde Reinigungswirkung auch für sensible und empfindliche Bauteile und Materialien wie Kunststoff oder Gummi geeignet.Eigenschaften: Schnelle und effektive Reinigung Entfettung von verschmutzten und korrodierten Kontakten

Permanent bonding on rough and uneven surfaces. Particularly suitable for large-area bonding. Properties : Special adjustable spray head (clean and fine spray pattern) High, immediate adhesive strength for permanent bonding Adheres to almost all surfaces Permanent bonding Very good moisture and heat resistance

Permanent bonding on rough and uneven surfaces. Particularly suitable for large-area bonding. Properties : Special adjustable spray head (clean and fine spray pattern) High, immediate adhesive strength for permanent bonding Adheres to almost all surfaces Permanent bonding Very good moisture and heat resistance

Reinigt und entfettet schonend Kunststoff und lackierte Oberflächen. Die schonende Zusammensetzung dient der Reinigung empfindlicher Oberflächen und verhindert ein angreifen der Oberflächenstruktur. Eigenschaften: Für empfindliche Oberflächen, verdunstet rückstandsfrei ohne Schlieren Hohe Reinigungskraft zur Vorbereitung von KlebeflächenHochwertiger Sprühkopf für feine Zerstäubung

Cleans, protects and maintains in one step. Undermines rust and forms a wafer-thin, antistatic protective film on the surface. Properties : Rust remover, lubricant, contact spray, cleaner and corrosion protection in one Free of silicones and resin Forms a fine protective film

Polylock activator ensures particularly fast and reliable curing of anaerobic adhesives and threadlockers. It is ideal for shortening reaction times and improves adhesion to passive materials such as stainless steel, zinc or plastic. Thanks to its versatility, the activator is an indispensable tool in both industrial and trade applications. Whether for repairs, assembly work or series production, Polylock Activator optimises the curing process and increases process reliability. Application is simple and efficient: spray on, allow to air briefly, apply adhesive – done. Ideal for anyone who values speed, adhesive strength and reliability in connections.

Polylock activator ensures particularly fast and reliable curing of anaerobic adhesives and threadlockers. It is ideal for shortening reaction times and improves adhesion to passive materials such as stainless steel, zinc or plastic. Thanks to its versatility, the activator is an indispensable tool in both industrial and trade applications. Whether for repairs, assembly work or series production, Polylock Activator optimises the curing process and increases process reliability. Application is simple and efficient: spray on, allow to air briefly, apply adhesive – done. Ideal for anyone who values speed, adhesive strength and reliability in connections.

PSF Lube  PSF Lube is a lubricant and grease spray developed for demanding applications in industry, trade and household use. This high-quality product provides long-lasting lubrication and reliable protection for a wide range of mechanical components and surfaces.

Our PSF Tack is a high-performance lubricant and grease spray, specially developed for demanding applications in industry, workshops and trade. The high-quality formula ensures reliable lubrication and effectively protects mechanical components from wear, corrosion and moisture – even under extreme conditions. Thanks to its strong adhesive effect, the lubricating film remains permanently in place even under high loads. The spray is water-resistant, high-pressure-resistant and ideal for chains, gear wheels, slide guides and many other indoor and outdoor applications.

Polysion PTFE Spray is used as a highly effective dry lubricant and grease-free permanent lubricant for slide rails and guide rails. The high PTFE content reduces the coefficient of friction. The PTFE spray is grease-free, water-repellent and anti-adhesive. Properties : High temperature resistance Reduces the coefficient of friction Does not attract dirt and dust Penetrates into the smallest areas Free of mineral oil and silicone

PTFE Lube - 400 ml PTFE Lube is a high-performance lubricant and grease spray designed for a wide range of applications. Thanks to its special polytetrafluoroethylene (PTFE) composition, it offers exceptional lubricating properties and ensures long-lasting lubrication.

Our TMK release agent prevents adhesive from sticking to unwanted areas in edge banding machines. It ensures clean, precise application of the adhesive and reliably protects surfaces that are not to be glued. This keeps the machine clean, reduces maintenance costs and increases efficiency. Ideal for even adhesive distribution and maximum product quality – in individual and series production.

Polysion sealant and adhesive remover removes paint, adhesive and sealant residues. Also removes solid seals from cylinders and similar components. Specially thickened to ensure a long service life, even on vertical surfaces. Properties : Dissolves stubborn adhesive and sealant residues Adheres to vertical surfaces Fast-acting Free from dichloromethane

Our mild, universally applicable Sensitive Cleaner is ideal for safely removing dirt and grease deposits without damaging sensitive surfaces. Perfect for adhesive pre-treatment, it ensures gentle and thorough cleaning. Particularly suitable for sensitive materials, Sensitive Cleaner offers effective cleanliness with maximum material protection.