Lubrication and greasing - Technical sprays  

Polysion Anti-Seize HT1400 is a high-performance, temperature-resistant lubricant. As an assembly spray, it protects against contact corrosion in active metals. has a very good separating effect and is metal-free. Due to its mineral-based active ingredients, it is temperature-resistant up to 1400°C. It prevents seizing and cold welding caused by friction, wear and corrosion. Properties : High temperature resistanceEffective corrosion protection Excellent adhesion and lubrication propertiesPressure resistant Resistant to gases, acids, salts and alkalisPrevents electrochemical corrosion

Anti-Seize Copper Paste is an indispensable lubricant for applications exposed to high loads and extreme conditions. This high-quality copper paste offers excellent protection against corrosion, wear and seizure, making it ideal for use in industry, vehicle construction and maintenance.

Chain and rope spray is usually applied as follows :Cleaning : Clean the chain or rope thoroughly to remove dirt, dust and old lubricant residues. A suitable cleaning agent or cleaning spray can help with this.Drying : Allow the cleaned chain or rope to dry completely before applying the spray.Preparation : Shake the can of chain or rope spray well to mix the ingredients.Application: Spray the spray evenly onto the chain or rope. Maintain a reasonable distance to ensure an even coating. Turn the chain or move the rope to ensure that the spray reaches all areas.Leave to soak in : Leave the spray to soak in according to the manufacturer's instructions. It usually takes a few minutes to penetrate and lubricate. Remove excess : Wipe off any excess spray with a clean cloth to prevent excessive build-up.Follow-up : Check the chain or rope and apply additional spray if necessary, especially after prolonged use or if they have been subjected to heavy wear.Regular application of chain and rope spray helps to extend their service life and maintain their performance. Again, follow the specific instructions for the product for optimal results.Chain and rope sprays are used in various areas :Vehicles : For lubricating and maintaining motorcycle chains, bicycle chains and other drive mechanisms. Industry and mechanical engineering : For maintaining and lubricating industrial chains, conveyor belts, ropes and machine parts to reduce friction and minimise wear.Marine : For lubricating ship rigging, boat winches and other marine applications to prevent corrosion and wear caused by salt water. Agriculture : For the care and lubrication of agricultural machinery, such as tractor chains and other moving parts, to ensure smooth operation. Household and DIY projects : For the maintenance of garage doors, garden tools and other household appliances with moving parts. These sprays serve to reduce friction, extend the service life of the treated parts and prevent corrosion by forming a protective layer.

Cleans, protects and maintains in one step. Undermines rust and forms a wafer-thin, antistatic protective film on the surface. Properties : Rust remover, lubricant, contact spray, cleaner and corrosion protection in one Free of silicones and resin Forms a fine protective film

PSF Lube  PSF Lube is a lubricant and grease spray developed for demanding applications in industry, trade and household use. This high-quality product provides long-lasting lubrication and reliable protection for a wide range of mechanical components and surfaces.

Our PSF Tack is a high-performance lubricant and grease spray, specially developed for demanding applications in industry, workshops and trade. The high-quality formula ensures reliable lubrication and effectively protects mechanical components from wear, corrosion and moisture – even under extreme conditions. Thanks to its strong adhesive effect, the lubricating film remains permanently in place even under high loads. The spray is water-resistant, high-pressure-resistant and ideal for chains, gear wheels, slide guides and many other indoor and outdoor applications.

Polysion PTFE Spray is used as a highly effective dry lubricant and grease-free permanent lubricant for slide rails and guide rails. The high PTFE content reduces the coefficient of friction. The PTFE spray is grease-free, water-repellent and anti-adhesive. Properties : High temperature resistance Reduces the coefficient of friction Does not attract dirt and dust Penetrates into the smallest areas Free of mineral oil and silicone

PTFE Lube - 400 ml PTFE Lube is a high-performance lubricant and grease spray designed for a wide range of applications. Thanks to its special polytetrafluoroethylene (PTFE) composition, it offers exceptional lubricating properties and ensures long-lasting lubrication.

Our silicone grease has been specially developed for the lubrication and maintenance of seals and O-rings. It is physiologically safe and does not attack plastics. Properties:Suitable for drinking water (odourless and tasteless)Suitable for food contact in accordance with DIN V 10517 Does not attack NBR and EPDM sealsResistant to many chemicalsTemperature-resistant, high-adhesion

Polysion Silicone Spray is a universal lubricant with a fast-acting and effective formula. Provides long-lasting care and protection for rubber, plastics and metal. Eliminates running and movement noises. Properties : Antistatic effect Waterproof Weather-resistant Fast-acting and reliable Protects rubber and plastics

Ultra-adhesive grease - 400 mlUltra-adhesive grease could be a product specifically designed for extremely strong adhesion.The exact application may vary from product to product, but in general, here are some steps that may apply to products with high adhesion:Preparation : Ensure that the surface is clean, dry and free of dust, grease or other contaminants. Clean the surface thoroughly to ensure optimal adhesion. Application : Apply the ultra-adhesive according to the manufacturer's instructions. This may involve direct application to the desired surface or a specific method of application, such as brushing, spraying or dabbing. Allow to cure : Allow the product to cure or dry according to the manufacturer's instructions. This process may vary in length depending on the product. Check : Check the adhesion and quality of the application to ensure it meets the requirements. Follow-up treatment : If necessary, you can apply additional layers to further improve adhesion or achieve the desired thickness. It is important to follow the specific instructions on the product, as different ultra-adhesives may require different application methods. Ultra-adhesive grease is often used in various applications to ensure strong adhesion and lubrication. :Industry and mechanical engineering : In areas where lubrication and strong adhesion are required at the same time, such as sliding surfaces, gears, bearings and other moving parts of machines. Vehicle industry : For specific applications such as joints, bearings, rails and other components in vehicles to ensure strong adhesion and lubrication under various operating conditions.Marine applications : On ship installations, boats and marine equipment where water resistance and strong adhesion are required to minimise wear and corrosion.Electronics : In some cases, ultra-adhesive grease is also used for electronic components to ensure strong bonding and lubrication without interfering with electrical contacts.The versatility of ultra-adhesive grease lies in its ability to provide durable, strong adhesion lubrication that works even under extreme conditions or in environments with high loads and vibrations.